*BY PURCHASING THIS HIGH PERFORMANCE PRODUCT YOU AGREE TO THE TERMS AND CONDITIONS SET FORTH IN THE LIMITED WARRANTY EXCLUSION POLICY
Don't be fooled by their cosmopolitan looks. The Digital Block Series Amplifiers provide Massive amounts of Power in a stylish and surprisingly small heat sink. These CEA 2006 Certified amplifiers boast advanced Digital Power Supply Switching, Bridgeable RCA Connections, Matched MOSFET "N" Drive outputs with an advanced Six Way Protection. All of these features are mounted in a beautiful brushed aluminum "finless" heat sink with a ﾬ" milled top plate bolted down with "hex bolts". The four cornered hex bolts unscrew to reveal mounting tubes (see attached pictures) that allows the installer to bolt down the amp for a razor clean installation. Top it off with a soft blue center logo glow with hundreds of "micro" LEDs. Massive Audio "D" Block Series combines "Style, Form, Function and Performance".
|RMS Power||4000w x 1|
|PEAK Power||8000w x 1|
|RMS @ 2 Ohms||1500w x 1|
|Min Impedance||0.5 Ohm|
|Min Ohm Bridged||n/a|
|Max Voltage||12.5v - 16v|
|Max RCA Voltage||5v|
|Freq. Response||10Hz - 180Hz|
|Dimensions||19.9" x 6.5" x 2.1"|
|Bass Remote||UR1 (Optional)|
(% riStoreData.settings.write_review_sub_heading %)
(% riStoreData.settings.ask_question_sub_heading %)
(% riStoreData.settings.write_comment_sub_heading %)
(% riStoreData.settings.report_abuse_sub_heading %)
(% comment.comment %)
showing reviews from (% reviewsData.reviews.from %) to (% reviewsData.reviews.to %)
No Review Found.
showing questions from (% questionsData.questions.from %) to (% questionsData.questions.to %)
No Question Found.
What is the recommended power wire for a massive audio d8000 2 channel 1-0, 2-0? Do I make 2 runs of power and ground?
We would suggest 0AWG - 4AWG for power and same for the ground.
I've perchaced two hippo 152 what do u recommend two push them?
We would recommend the D8000.1 and wire to a 0.5 Ohm configuration or an E4 on each Hippo152 at 1 Ohm each woofer.
I have 2 12s hippo xl 122. What amp do I need to push them Both.
Hello Nestor, Our D8000 would be great for them: D8000 - 4,000 Watts RMS @ 0.5 Ohm Mono Mega Amplifier
What is the rating for 2 d8000 bridged at 2ohms
(1) D8000 is 4K RMS @ 1/2 Ohm @ 300 AMPS of Continuous Current Needed (2) D8000 "Strapped" or "Slaved" is 8K RMS @ 1 Ohm @ Over 600 AMPS of Continuous Current Needed (2) D8000 @ 2 Ohm would be a waist of money