SOLD AS EACH
*BY PURCHASING THIS HIGH PERFORMANCE PRODUCT YOU AGREE TO THE TERMS AND CONDITIONS SET FORTH IN THE LIMITED WARRANTY EXCLUSION POLICY
Want “Big Bottom Bass?” Well when Massive Audio designed the “HIPPO XL” Series Subwoofers we had one thing we wanted out of the design. A subwoofer with a “Big Bottom.” The improved HIPPO “XL” subwoofers have changed the herd and wants being heard! The upgraded 2K RMS CEA2031 Certified “HIPPO 122 “XL” & 152 “XL” now use 350 Oz high energy double stacked Strontium magnets bolted to a custom milled over-sized back plate. This design helps lower heat buildup in the dual 2 Ohm Black Anodized 3” VC Formers which are using space age Kevlar Spunlace for extra strength! Kevlar Fiber reinforced Non-Pressed Paper Cones that have been stitched in “Red” into the over-sized surrounds. The bonded to dual Poly Nomex Spiders carry the stitched hard wired high voltage tinsels leads that are hard wired to pure 10 gauge copper speaker wire. The Massive Audio Hippo 122 “XL” & 152 “XL” Extra: “BIG BOTTOM”
|Voice Coil||3" Dual 2 Ohm|
|Surround||Tall and Narrow Foam|
|Terminals||Heavy Duty Direct Input Wires Connection|
|Tinsel Leads||Heavy Duty Triple|
|Ported Box||17.8"H x 16.6"D x 17.8"W (Round Port 9.4" x 8.6") Internal|
|Sealed Box||2.77 ft3 Internal|
(% riStoreData.settings.write_review_sub_heading %)
(% riStoreData.settings.ask_question_sub_heading %)
(% riStoreData.settings.write_comment_sub_heading %)
(% riStoreData.settings.report_abuse_sub_heading %)
(% comment.comment %)
showing reviews from (% reviewsData.reviews.from %) to (% reviewsData.reviews.to %)
No Review Found.
showing questions from (% questionsData.questions.from %) to (% questionsData.questions.to %)
No Question Found.
How do you run the speaker wires. You bridge them or run 4 wires out to amp?
It all depends on the amplifier and how your final impedance will be. Most people tie both POS together and both NEG together for a 1 ohm final load for a single woofer.
How bout if you have 2 152s an a 1 channel mono block.how do you wire them if your amp stable at 1 ohm???
You would only be able to wire a pair of dual 2 ohm speakers at a 0.5 or 2 ohm final load. So if you have a 1 ohm stable amplifier you would not be using 100% of the power. This amplifier would be best suited for 1 dual 2 ohm woofer however there is nothing wrong with running a final 2 ohm load as the amp will thank you for not pushing at its lowest impedance. Your best option is to use a 2 ohm mono amplifier like our BP4000, BP6000 or BP8000 for example.