Massive Audio NANO "BLU" Series Amplifiers. Our CTA 2006 certified models include the BL1, BL3 & BL4 Mono Block, BLX2 Two Channel, BLX4 & BLX48 Four Channel and the BLX5 Five Channel. NANO BLU amps are only 4.25” W X 1.6” H and range from 6.5" to 10.86" L. All models feature Digital Platforms, Built In OEM Line Converters, Up to 9V In, Line Out, Auto Turn (no turn on wire needed) with 12V out and support a USB which accommodates the optional UBT1 Bluetooth Dongle for audio streaming. All Nano "BLU" Amps use nickel plated RCA inputs and circuit boards are sprayed for water resistance and then everything gets shielded in a rust proof aluminum housing. Each model supports a "Docking Port" to plug in an optional custom matching Railcap Booster (RCLX).
|Peak Output Power @ 14.4V||1600W Max Mono|
|1 Ohm RMS||800w X 1|
|2 Ohm RMS||400W x 1|
|4 Ohm RMS||N/A|
|4 Ohm Bridged||N/A|
|THD at 4 Ohm Load 30% Rated Power||<0.03%|
|Minimum Load||1 Ohm Mono|
|Gain Remote||UR1 (Optional)|
|Dimension||1.6"H x 4.25"W x 6.75"L|
(% riStoreData.settings.write_review_sub_heading %)
(% riStoreData.settings.ask_question_sub_heading %)
(% riStoreData.settings.write_comment_sub_heading %)
(% riStoreData.settings.report_abuse_sub_heading %)
(% comment.comment %)
showing reviews from (% reviewsData.reviews.from %) to (% reviewsData.reviews.to %)
No Review Found.
showing questions from (% questionsData.questions.from %) to (% questionsData.questions.to %)
No Question Found.
Not clear how to make bl1 1 ohm?
That would depend on the speaker you are using. If you are using a 1 ohm final load driver then the amp will push 1 ohm. If you have a 2 or 4 ohm driver the amp will only push 2 or 4 ohm. So you do not configure the amp to an impedance the speaker is what determines this.
What gauge wires (Power, Ground & Speaker) do you recommend are used with the BL1? Thank you.
4 AWG to 8 AWG is what we would recommened for Power and Ground. 12 to 16 AWG should work well for the speakers.