The BLADE BP Series Amplifiers are designed with our “Live, Loud and Play Hard” motto. All amplifiers have built-in OEM line converters with RCA inputs that can take a high level speaker signal at up to 9 Volts directly in. By sensing the DC off set of a factory radio it can activate the ATO (Auto Turn On) feature and convert the 12V turn on into a 12V switched out. Blade “BP” are Class AB designed with a minimum per channel impedance operation of 2 Ohm with the exception of the BP2000.1, BP1200.1 which are Class “D” and can play down to 1 Ohm minimum. The monster BP4000 & BP6000 are full range Digital and 2 OHM stable. All Blade “BP” amps use Mil Spec PCBs, SMD parts, 5 way protection, full MOSFET high grade switching devices and all comply with the “World Wide Standards”, “ROHS”, “E-Mark” and are CTA2006 Compliant. This ensures that no competition can stand up to the BLADE BP when it comes to features, performance and value.
- Built-In OEM Line Converter
- 1 Ohm Stable Design
- Class Full Range Digital
- Mil Spec PCB with SMD parts
- Built-in Noise Reduction Circuitry
- Full MOSFET with High Grade Switching Devices
- Built-In Auto Sensing Turn On Function (Hi-Inputs)
- 12V Remote Output for External Devices (Hi-Level Inputs)
- 0dB ~ 12dB Bass Boost
- Next Generation Advanced 5 Way Protection Circuitry
- World Wide Standards Compliant (RoHS, E-Mark, CTA-2006, CE)
|Peak Output Power @ 14.4V
||2000W x 1
|1 Ohm RMS
||1000W x 1
|2 Ohm RMS
||900W x 1
|4 Ohm RMS
||500W x 1
|4 Ohm Bridged
|THD at 4 Ohm Load 30% Rated Power
||1 Ohm Mono
||2"H x 7.1"W x 13.4"L
I HAVE 2 FOSGATE SUBS 12INCH P3 2om. Does amps 2000x1 work on this 2 subs. Or will it be 2 much on the subs.
The BP2000.1 is 1000 Watts RMA @ 1 Ohm. I do not know enough about your subwoofers to tell you if would be over powering them although try and use a subwoofer configuration of 1 ohm final load to maximize the BP2000.1
the bp3000.1 monoblock is stable to 2 ohms or not ?
All of our amplifers are 2 Ohm stable and the BP2000.1 is 1 Ohm minimum.
I have a Bp2000.1 what two massiave subs woukd be great with this amp or can this amp run four hippo 8s?
For this amplifier we would suggest the MMA124's - If you would like to run 4 of the HIPPO84 or HIPPOXL84 woofers we would suggest BP6000.1