*A WARRANTY ACKNOWLEDGEMENT FORM WILL BE EMAILED TO YOU AND MUST BE COMPLETED BEFORE SHIPPING. BY PURCHASING THIS HIGH PERFORMANCE PRODUCT YOU AGREE TO THE TERMS AND CONDITIONS SET FORTH IN THE LIMITED WARRANTY EXCLUSION POLICY
Just when you thought that it was too complicated to properly power up megawatt subwoofers; Massive Audio comes along and releases the DP10K Power Amp!
All Digital, Ultra High-Speed Switching, Crystal Clean Full Range with a TRUE power output of 5,600 Watts RMS @ 1 ohm @ 16V.
This amplifier measures in at only 3.07” x 9.11” x 13.07” and packs twin full time exhaust fans to cool its output. The DP10K can do all this and operate at DC 9V—16V. Protection is key and is controlled by a processor that illuminates a red LED when 85% of the amplifier’s capacity limit is reached. Adjustable Hi Pass and Low Pass crossovers along with a parametric equalizer with a variable 0-12dB bass boost allow for complete control.
|RMS @ 1 Ohm 14.4V||5,300w x 1|
|PEAK Power||10,000w x 1|
|RMS @ 2 Ohm 14.4V||3,300w x 1|
|Min Impedance||1 Ohm|
|Min Ohm Bridged||n/a|
|THD||0.9% Continuous @ 4Ohm, 100Hz|
|Max RCA Voltage||10v (+/- 5%)|
|Freq. Response||10Hz ~ 12KHz (+/-1dB)|
|Dimensions||9.11 (in) W x 3.07 (in) H x 13.07 (in) L|
(% riStoreData.settings.write_review_sub_heading %)
(% riStoreData.settings.ask_question_sub_heading %)
(% riStoreData.settings.write_comment_sub_heading %)
(% riStoreData.settings.report_abuse_sub_heading %)
(% comment.comment %)
showing reviews from (% reviewsData.reviews.from %) to (% reviewsData.reviews.to %)
No Review Found.
showing questions from (% questionsData.questions.from %) to (% questionsData.questions.to %)
No Question Found.
I have 2 massive hippos xl 15s which amp can I use to push those and get all I can out of them something that won’t heat up in the long run
Hello Miguel, Since you have a pair of dual 2 ohm subs, your final load is going to be 2 ohm mono. Our BP6000.1 is our strongest 2 ohm mono amp: BP6000.1 - 3000 Watts RMS @ 2 Ohm Full Range Digital Amplifier. If you want to get the most out of those subs, I would suggest a pair of 2,000 watt @1 ohm mono amplifiers. Such as the E4: E4 - 2,000 Watts RMS x 1 @ 1 Ohm Mono Block Amplifier. Thank you, Aaron
How does one provide power for the DP 10K in a isuzu suv? I bought a pair of XL104s from you recently.I like them but my amp claims 1125 rms@ 2 ohms ×2,but it has 2 ×40 amp fuses so it sounds like I could use way more power.Thanks
Please email our tech support at email@example.com. Thank you and stay safe.