SOLD AS EACH
Want “Big Bottom Bass?” Well when Massive Audio designed the “HIPPO XL” Series Subwoofers we had one thing we wanted out of the design. A subwoofer with a “Big Bottom.” The improved HIPPO “XL” subwoofers have changed the herd and wants being heard! The upgraded 2K RMS CEA2031 Certified “HIPPO XL 104" now uses 350 Oz high energy double stacked Strontium magnets bolted to a custom milled over-sized back plate. This design helps lower heat buildup in the dual 2 Ohm Black Anodized 3” VC Formers which are using space age Kevlar Spinlace for extra strength! Kevlar Fiber reinforced Non-Pressed Paper Cones that have been stitched in “Red” into the oversized surrounds. The bonded to dual Poly Nomex Spiders carry the stitched hard wired high voltage tinsels leads that are hard wired to pure 8 gauge copper speaker wire.
FEATURES:
SPECIFICATIONS:
Size | 10" |
Peak Watts | 4000 |
RMS Watts | 2000 |
Cone | Non-Pressed Paper |
Voice Coil | 3" Dual 4 Ohm |
Surround | Tall and Narrow Foam |
Magnet | 350oz Strontium |
Terminals | Heavy Duty Direct Input Wires Connection |
Basket | Cast Aluminum |
Tinsel Leads | Heavy Duty Triple |
X-Max | 17.5mm |
SPL | 93.59dB |
Ported Box | 13.8"H x 13.8"D x 25.6"W (Round Port 4" x 11.8") |
Sealed Box | 1.47 ft3 |
(% riStoreData.settings.write_review_sub_heading %)
(% riStoreData.settings.ask_question_sub_heading %)
(% riStoreData.settings.write_comment_sub_heading %)
(% riStoreData.settings.report_abuse_sub_heading %)
showing reviews from (% reviewsData.reviews.from %) to (% reviewsData.reviews.to %)
No Review Found.
showing questions from (% questionsData.questions.from %) to (% questionsData.questions.to %)
No Question Found.
Based on 3 reviews Write a review
{ "@context": "http://schema.org/", "@type": "AggregateRating", "reviewCount": "3", "ratingValue": "5.0", "itemReviewed": { "@type" : "Product", "name" : "HIPPOXL104 - 12" 2000 Watts RMS Dual 4 Ohm 3" V.C. Mega Subwoofer", "offers": { "@type": "AggregateOffer", "lowPrice": "419.95", "highPrice": "419.95", "priceCurrency": "USD" } } }
What's the minimum airspace for two of these with a round aero port, and what measurements should the port be if I want 32hz? Also would you suggest a double baffle?
Hello Dre, I would suggest 2.25 cubes after displacement, and yes on the double baffle. You can do a 3" diameter port that is 6" long to get that 32hz tuning in the 2.25 box. Thank you.
for two of them in a seal box how air space
Hello Michael, If you must sealed them, I would suggest 2.0 cubes combined after displacement for the pair of HippoXL10's. Thank you.
(% comment.comment %)
No Comments