SOLD AS EACH
Want “Big Bottom Bass?” Well when Massive Audio designed the “HIPPO XL” Series Subwoofers we had one thing we wanted out of the design. A subwoofer with a “Big Bottom.” The improved HIPPO “XL” subwoofers have changed the herd and wants being heard! The upgraded 2K RMS CEA2031 Certified “HIPPO 122 “XL” & 152 “XL” now use 350 Oz high energy double stacked Strontium magnets bolted to a custom milled over-sized back plate. This design helps lower heat buildup in the dual 2 Ohm Black Anodized 3” VC Formers which are using space age Kevlar Spinlace for extra strength! Kevlar Fiber reinforced Non-Pressed Paper Cones that have been stitched in “Red” into the oversized surrounds. The bonded to dual Poly Nomex Spiders carry the stitched hard wired high voltage tinsels leads that are hard wired to pure 10 gauge copper speaker wire. The Massive Audio Hippo 122 “XL” & 152 “XL” Extra: “BIG BOTTOM”
FEATURES:
SPECIFICATIONS:
| Size | 12" |
| Peak Watts | 4000 |
| RMS Watts | 2000 |
| Cone | Non-Pressed Paper |
| Voice Coil | 3" Dual 2 Ohm |
| Surround | Tall and Narrow Foam |
| Magnet | 350oz Strontium |
| Terminals | Heavy Duty Direct Input Wires Connection |
| Basket | Cast Aluminum |
| Tinsel Leads | Heavy Duty Triple |
| X-Max | 17.5mm |
| SPL | 95.99dB |
| Ported Box | 14"H x 14"D x 14"W (Round Port 24" x 12") |
| Sealed Box | 1.58 ft3 |
What amp or amps would properly and fully power 2 of these subwoofers with a 5 cubic ft. ported box?
2 HIPPOXL152 Woofers would match with a BP8000.1 (2 Ohm final Load) the box size would not matter for the amplifier and we always suggest building the box to the subwoofers specifications.
Hippo xl 122 model is 4homs or 2 homns voice coil
This model is 2 ohms but we also have our HIPPOXL124 that is 4 ohms.
https://www.massiveaudio.com/collections/subwoofers/hippoxl-series
What is the magnet diameter of the Massive Audio Hippoxl122?
OD = 220 mm
What wires connect to each other on a massive hippo 122 xl does red go to red or black to red
This depends on how you want your voice coil impedance configured. You would need to consult with an installer and based on the amplifier's load requirements you use your desired impedance will change.
